MO-BAT ꟷ AJF
Mobile separator tank “mo-BAT”
The mobile separator tank “mo-BAT” is designed for construction sites and precast concrete factories.
This tank is specifically developed for cleaning concrete skips and other washing applications. It is suitable for both on-site use and in precast plants.
Solid particles present in the concrete water are retained by a dedicated Big Bag filter, which keeps them inside the bag.
The filtered water can be discharged through two separate outlets.
If pH neutralization is required, it can be easily integrated.
When the fine mineral content is high and the pH level ranges from 11 to 13, discharging water into the environment or waterways is strictly prohibited. Such disposal could cause severe damage to both water pipelines and ecosystems. That’s why mo-BAT mobile settling tanks are a valuable asset for treating concrete wastewater.
- Optimizes time spent managing wet sludge, with no need for dredging, and immediately yields dry sludge.
- Achieves significant savings on disposal costs thanks to efficient sludge dewatering.
- Integrated lifting rings and forklift compartments make transport and handling easier.
- Ensures compliance with all environmental standards, including pH neutralization.
- A special filter bag (Big Bag Filter) ensures optimal water filtration.
- Allows concrete skips and tools to be cleaned directly on-site.
- Helps reduce water consumption for cleaning.
Benefits of water
- Cold water available for production
- Many size options
- Runs on electricity
- Optional cooling of the premises
- Possibility of integration into Polarmatic heating systems, also as an upgrade
Settling tanks used for construction wastewater typically consist of steel containers with partition walls set at various heights. Construction site water is poured in, and sedimentation causes fine particles to settle at the bottom. Once sedimentation is complete, the water is discharged through an upper outlet.
Type |
Daily Water Volume |
Daily Sludge Volume |
| mo-BAT | ⇾ 3m3 | ⇾ 250 kg |
| mo-BAT 1000 + | ⇾ 3m3 + pH neutralization* + cleaning pump (option) | ⇾ 250 kg |
| mo-BAT 3000 | ⇾ 6m3 + pH neutralization* + cleaning pump + plateform | ⇾ 500 kg |
pH neutralization by CO₂ treatment
The discharged water’s pH should generally be between 5.5 and 8.5 to minimize negative impacts on aquatic ecosystems.
| mo-BAT 1000 + | Integrated cleaning pump (optional) |